Site icon Computer Repair in Lexington | Lexington PC Clinic – Virus Removal & IT Support for Small Businesses

How to Fix a Critical Process Died BSoD

Yashwanta
Critical Process Died

5 Easy Solutions for the "Critical Process Died" Error – Fix BSoD Fast

How to Fix the “Critical Process Died” Blue Screen Error

The “Critical Process Died” error is a common issue that many Windows users face. It happens when an essential process in your operating system stops working, leading to a sudden crash and the dreaded Blue Screen of Death (BSoD). If you’re searching for a Critical Process Died fix, this guide provides five proven solutions to resolve the problem.

1. Use SFC /SCANNOW to Repair Corrupted Files

A good starting point for a Critical Process Died fix is using the System File Checker (SFC) tool. This built-in utility scans and repairs corrupted system files that may be causing the error.

Steps:

  1. Open Command Prompt (Admin) or Windows Terminal (Admin).
  2. Type this command and hit Enter: 
    sfc /scannow
  3. Let the scan complete. If issues are found, SFC will try to fix them automatically.
  4. Restart your PC and see if the Critical Process Died error is resolved.

2. Check Your Disk for Errors with CHKDSK

Another potential Critical Process Died fix involves checking your hard drive for errors. The CHKDSK tool can detect and repair bad sectors and other disk-related problems.

Steps:

  1. Open Command Prompt (Admin).
  2. Type the following command and press Enter: 
    chkdsk C: /r /f

    Replace C: with the drive where Windows is installed.

  3. If prompted, type Y to schedule the scan for the next reboot.
  4. Restart your computer to let CHKDSK run.

3. Update Your BIOS

Outdated BIOS firmware can also trigger the “Critical Process Died” error. Updating your BIOS can improve system stability and is a crucial step in finding a Critical Process Died fix.

Steps:

  1. Identify your motherboard or computer model.
  2. Visit the manufacturer’s website to download the latest BIOS update.
  3. Follow the instructions provided to complete the update.
    ⚠️ Important: Make sure your computer stays powered during the update to avoid damaging your motherboard.

4. Rebuild Your Boot Configuration

If your system’s Master Boot Record (MBR) is corrupted, it can cause boot-related errors, including the “Critical Process Died” issue. Rebuilding the MBR is a reliable Critical Process Died fix for this scenario.

Steps:

  1. Boot into Advanced Startup Options (press F8, F11, or another key during startup).
  2. Select Troubleshoot > Advanced Options > Command Prompt.
  3. Enter these commands one at a time, pressing Enter after each: 
    bootrec /fixmbr  
bootrec /fixboot  
bootrec /scanos  
bootrec /rebuildbcd
  4. Restart your computer and check if the issue persists.

5. Run DISM to Repair a Corrupted Windows Image

If the Windows image itself is corrupted, the DISM (Deployment Image Servicing and Management) tool offers another effective Critical Process Died fix.

Steps:

  1. Open Command Prompt (Admin).
  2. Run the following commands one by one: 
    DISM /Online /Cleanup-Image /CheckHealth  
DISM /Online /Cleanup-Image /ScanHealth  
DISM /Online /Cleanup-Image /RestoreHealth
  3. Wait for the process to finish—it may take several minutes.
  4. Restart your PC and see if the Critical Process Died error is gone.

Wrapping It Up

Finding the right Critical Process Died fix can take some trial and error, but these five solutions—SFC, CHKDSK, updating your BIOS, rebuilding the boot configuration, and running DISM—are highly effective. If the error persists, consider updating your drivers, performing a system restore, or reinstalling Windows.

We hope this guide helped you resolve the “Critical Process Died” error. Have more tips or questions? Share them in the comments below!

Exit mobile version